Home page

Sender 200 Classic Curved Ramp

 BUILD CONFIDENCE - DEVELOP SKILLS ON CURVED AND STRAIGHT RAMPS

The 200 Curved has a sweet curved take off perfect for beginners but equally as important for Senders looking to improve and refine jumping skills. Advanced Riders should be able to Huck High and Far on the 200 or increase skills and difficulty by stepping up to land on a higher Tabletop or land down a 350 or 500 Straight Ramp. 

The 200 Ramp is an ideal safety feature when placed behind a 350 Ramp OR at the end of a 350 Tabletop Drop Off to reduce the height difference. This reduces the chance of a chain ring hang up and an OTB (Over the Bars)!

The 200 is super portable and can easily be thrown in the back of your vehicle for jump sessions away from home.

LAND TO FLAT FACTOR!

Yes - No Problem

Our 200 Curved Ramp bolts onto or works with other Sender features:

• The Wedge (Half Size Tabletop) 
• TableTop (Full size Tabletop) 
• Pump Roller - 
• Balance Beam for Roll on - Roll Off 

ASSEMBLY!

You will need a drill driver - 4 mm Drill Bit - TX Torq 25 Driver bit - Pozi 2 Driver bit and 2 x Quick Clamps are useful. It will take 1 hr to complete assembly.

SPECIFICATION!

• Peg points on leading edge of ramp to prevent movement
• 2 Bolt points for hooking and securing features
• Strap points for carrying on back
• We use super strong 13 layer - 18 mm Birch Plywood for the Substructure and Surfaces are 18 mm Birch Core Phenolic for added grip and durability
• Stainless Steel Fixing Screws
• Approx Size Unfolded 600 Wide x 650 Long x 200 High
• Approx Weight 7 kgs

MAKE YOUR SENDER RAMPS LAST A LIFETIME!

DO NOT use Varnish and DO NOT coat Brown Phenolic surfaces. A Low VOC Natural coloured Water Based Decking / Timber Protector will greatly prolong the life of your Sender products if applied to the Birch plywood faces and the cut edges / routered text of the Brown Phenolic Surfaces. You should always store Sender Products inside when not in use. Grease bolts and silicone spray T Nut fixings.

WARNING!

Jumping can go wrong very quickly and lead to serious life threatening injuries or death. Always progress up ramp sizes as you grow your experience and confidence but nothing can rule out an accident. Wear a Full face helmet, Gloves, Knee and Elbow Pads plus Eyewear as a minimum. A neck brace is also an advisable piece of PPE as you attempt bigger jumps . A crash will result in damage to property, equipment and potentially other riders. Always choose a location with plenty of clear run in - run out space and make sure ramps and features are placed flat and all components checked to be secure and in good working order before use. 

NOTICE!

Products may vary slightly in shape / size and colour from images. Changes may be made without warning. Please contact Sender USA if you need help, advice or clarity on product selection.

Sender 200 Classic Straight Ramp

BUILD CONFIDENCE - DEVELOP SKILLS ON CURVED AND STRAIGHT RAMPS

The Sender 200 Straight Ramp is the perfect beginners / starter ramp. Easy to FLY OFF of with NO KICK. It is excellent in combination with a 200 Curved Ramp. Straight ramps are much better for landing on because the SWEET spot is longer. Landing on a curved ramp is more advanced and requires more skill and control especially to carry speed by pumping the transition. Curved Take off - Straight Landing!

Advanced Riders should still be able to Huck High and Far on the 200. 

The 200 Straight Ramp is an ideal safety feature when placed behind a 350 Ramp OR at the end of a 350 Tabletop Drop Off to reduce the height difference. This reduces the chance of a chain ring hang up and an OTB (Over the Bars)!

The 200 Straight is super portable and can easily be thrown in the back of your vehicle for jump sessions away from home.

LAND TO FLAT FACTOR!

Yes - No Problem

SENDER PRO PRODUCTS!

All our USA Straight ramps are sold with PRO Tops. Holes are drilled into the surface that allow you to secure T Nut fixings which then allow you to bolt Sender Rumble Strips or Sender Rocks to create more realistic and challenging Trail like scenarios.

Our 200 Straight Ramp bolts onto and works with other Sender features:

• The Wedge (Half Size Tabletop) Coming Soon
• TableTop (Full size Tabletop) IN STORE NOW
• Pump Roller - (Better with 2 Curved Ramps) Coming Soon
• Balance Beam for Roll on - Roll Off - Coming Soon

ASSEMBLY!

You will need a drill driver - 4 mm Drill Bit - TX Torq 25 Driver bit - Pozi 2 Driver bit and 2 x Quick Clamps are useful. It will take 1 hr to complete assembly.

SPECIFICATION!

• Peg points on leading edge of ramp to prevent movement
• 2 Bolt points for hooking and securing features
• Strap points for carrying on back
• We use super strong 13 layer - 18 mm Birch Plywood for the Substructure and Surfaces are 18 mm Birch Core Phenolic for added grip and durability
• Stainless Steel Fixing Screws
• Approx Size Unfolded 600 Wide x 650 Long x 200 High
• Approx Weight 7 kgs

MAKE YOUR SENDER RAMPS LAST A LIFETIME!

DO NOT use Varnish and DO NOT coat Brown Phenolic surfaces. A Low VOC Natural coloured Water Based Decking / Timber Protector will greatly prolong the life of your Sender products if applied to the Birch plywood faces and the cut edges / routered text of the Brown Phenolic Surfaces. You should always store Sender Products inside when not in use. Grease bolts and silicone spray T Nut fixings.

WARNING!

Jumping can go wrong very quickly and lead to serious life threatening injuries or death. Always progress up ramp sizes as you grow your experience and confidence but nothing can rule out an accident. Wear a Full face helmet, Gloves, Knee and Elbow Pads plus Eyewear as a minimum. A neck brace is also an advisable piece of PPE as you attempt bigger jumps . A crash will result in damage to property, equipment and potentially other riders. Always choose a location with plenty of clear run in - run out space and make sure ramps and features are placed flat and all components checked to be secure and in good working order before use. 

NOTICE!

Products may vary slightly in shape / size and colour from images. Changes may be made without warning. Please contact Sender USA if you need help, advice or clarity on product selection.

Sender Orbit Extension

INSTANTLY UP SIZE YOUR EXISTING RAMP! MAKE THE BIGGEST RAMP IN OUR RANGE!

The ORBIT fits onto CURVED 350 - 500 and 650 Extension Ramp. It instantly boost you to the next size!

• 350 to 500
• 500 to 650
• 650 to 800

The combination of a 500 Ramp with 650 Extension and an Orbit to make an 800 is the ULTIMATE RAMP SET. Up or Downsize your ramp quickly depending on the terrain and riders experience and skill level. 

The ORBIT IS NOT Designed for our Straight Ramps and it MUST NOT be used on our 200 Ramps.

The ORBIT is super portable and can easily be thrown in the back of your vehicle with your ramps for jump sessions away from home.

LAND TO FLAT FACTOR!

Yes No Problem - However if you go full SEND at 800 it takes considerable skill to land to flat. We recommend finding a down slope and you will need a Full Suss Bike.

The ORBIT bolts onto and works with:

• 350 CURVED IN STORE NOW
• 500 CURVED IN STORE NOW
• 650 CURVED IN STORE NOW

ASSEMBLY!

You will need a drill driver - TX Torq 25 Driver bit - Pozi 2 Driver bit and 2 x Quick Clamps are useful. It will take 30 Mins to complete assembly.

SPECIFICATION!

• We use super strong 13 layer - 18 mm Birch Plywood for the Substructure and Surfaces are 18 mm Birch Core Phenolic for added grip and durability
• Stainless Steel Fixing Screws
• Approx Size Folded 600 Wide x 200 Long x 270 High
• Approx Weight 3.5 kgs

MAKE YOUR SENDER RAMPS LAST A LIFETIME!

DO NOT use Varnish and DO NOT coat Brown Phenolic surfaces. A Low VOC Natural coloured Water Based Decking / Timber Protector will greatly prolong the life of your Sender products if applied to the Birch plywood faces and the cut edges / routered text of the Brown Phenolic Surfaces. You should always store Sender Products inside when not in use. Grease bolts and silicone spray T Nut fixings.

WARNING!

Jumping can go wrong very quickly and lead to serious life threatening injuries or death. Always progress up ramp sizes as you grow your experience and confidence but nothing can rule out an accident. Wear a Full face helmet, Gloves, Knee and Elbow Pads plus eye wear as a minimum. A neck brace is also an advisable piece of PPE as you attempt bigger jumps . A crash will result in damage to property, equipment and potentially other riders. Always choose a location with plenty of clear run in - run out space and make sure ramps and features are placed flat and all components checked to be secure and in good working order before use.

NOTICE!

Products may vary slightly in shape / size and colour from images. Changes may be made without warning. Please contact Sender USA if you need help, advice or clarity on product selection.

Classic Tabletop Extra Leg Sets

You can ADD additional Legs Sets to your existing Tabletop.

200 Legs BOLT onto the sides of the ramp and can remain in position at all times

350 - 500 - 650 Legs are attached using Hinges so the legs FOLD out of the way when not in use! Simply Strap UP the legs you don't want and Unstrap the legs you do want!

On the Tabletop Sides there are 3 Leg Positions - One at Either End and One in the Middle. It is possible to configure you Tabletop with ALL the Legs sets mounted at once. However, the STRONGEST, MOST STABLE configuration is to mount the legs at each end. So you may decide to place the most used size of legs at each end and the least used in the middle.

IMPORTANT SAFETY NOTICE!

IF you use the Tabletop UNSUPPORTED at the end utilising a mid point Leg position leverage is HIGH and the Tabletop is WEAKER. In this situation you MUST NEVER land onto the projecting end of the Tabletop. But you CAN use it as a Drop Off because there is no impact force / dynamic loading from above. You CAN HOOK the end of the projecting Tabletop to a Landing ramp which will Strengthen and Stabilise the Structure.

In all cases you MUST use the Joining Blocks IN THE CORRECT POSITION UNDER THE DECKS to secure TWO Tabletops Together as a DOUBLE.

If you need help or advice Contact Sender Ramps USA.

ASSEMBLY!

You will need a drill driver - 4 mm Drill Bit - TX Torq 25 Driver bit - Pozi 2 Driver bit and 2 x Quick Clamps are useful. It will take 1.5 hr to complete assembly.

CARE of YOUR PRODUCT!

The tolerances in the Legs Sets where they join the supports is small. If components get wet the wood can swell and jam. Simply dry the ramps and Legs inside. A rubber mallet will help you TAP components apart if they are jammed to allow them to dry apart. We recommend using the same Timber Protector as for ramps but this can increase friction between parts. A file wrapped in sand paper will quickly enlarge the slots and make operation easy! Take care of your ramps and they will last a lifetime! If you are a Coach Prior - Preparation Prevents Piss Poor Performance... Look after your PRO KIT for immediate and hassle free operation ;)

Grease and Silicone spray T Nuts and Bolts for pain free operation.

ALWAYS Visually and Manually CHECK COMPONENTS FOR WEAR / TEAR / FUNCTION before use!

Sender 650 Classic Curved Extension 

BUILD CONFIDENCE - DEVELOP SKILLS ON CURVED AND STRAIGHT RAMPS

The 650 Curved Extension is for Advanced riders starting to SUPERSIZE jumping! Our 650 Bolts onto the back of the 500 in minutes! You can then bolt the Orbit onto the 650 to make a monster 800 High Ramp!

The 650 Curved Extension is super portable and can easily be thrown in the back of your vehicle with a 500 Ramp for jump sessions away from home.

LAND TO FLAT FACTOR!

Yes No Problem - However an increased skill level is required to land to flat. A down slope or landing ramp will provide happier landings

Our 650 Curved Extension bolts onto and works with other Sender features:

• The Wedge (Half Size Tabletop) Coming Soon
• Tabletop (Full size Tabletop) IN STORE NOW
• Pump Roller - (Curved to Curved is Perfect) IN STORE NOW
• 500 Curved Ramp - Turn your 500 into a 650 Ramp IN STORE NOW
• Orbit - Bolts onto your 650 to make an 800! IN STORE NOW

ASSEMBLY!

You will need a drill driver - 4 mm Drill Bit - TX Torq 25 Driver bit - Pozi 2 Driver bit and 2 x Quick Clamps are useful. It will take 1 hr to complete assembly.

SPECIFICATION!

• Folding and Compact for Transportation and Storage
• 2 Bolt points for hooking and securing features
• Strap points for securing legs
• We use super strong 13 layer - 18 mm Birch Plywood for the Substructure and Surfaces are 18 mm Birch Core Phenolic for added grip and durability
• Stainless Steel Fixing Screws
• Approx Size Folded 600 Wide x 270 Long x 650 High
• Approx Weight 7.5 kgs

MAKE YOUR SENDER RAMPS LAST A LIFETIME!

DO NOT use Varnish and DO NOT coat Brown Phenolic surfaces. A Low VOC Natural coloured Water Based Decking / Timber Protector will greatly prolong the life of your Sender products if applied to the Birch plywood faces and the cut edges / routered text of the Brown Phenolic Surfaces. You should always store Sender Products inside when not in use. Grease bolts and silicone spray T Nut fixings.

WARNING!

Jumping can go wrong very quickly and lead to serious life threatening injuries or death. Always progress up ramp sizes as you grow your experience and confidence but nothing can rule out an accident. Wear a Full face helmet, Gloves, Knee and Elbow Pads plus Eyewear as a minimum. A neck brace is also an advisable piece of PPE as you attempt bigger jumps . A crash will result in damage to property, equipment and potentially other riders. Always choose a location with plenty of clear run in - run out space and make sure ramps and features are placed flat and all components checked to be secure and in good working order before use.

NOTICE!

Products may vary slightly in shape / size and colour from images. Changes may be made without warning. Please contact Sender USA if you need help, advice or clarity on product selection.

Sender 500 Classic Straight Ramp 

BUILD CONFIDENCE - DEVELOP SKILLS ON CURVED AND STRAIGHT RAMPS

The Sender 500 Straight Ramp is the perfect Advanced ramp. Straight ramps are much better for landing on because the SWEET spot is longer. Landing on a curved ramp is more advanced and requires more skill and control especially to carry speed by pumping the transition.

Our 500 Straight forms the base ramp for the 650 Bolt on Extension which can be added to make this a monster "Huck To Flat" Ramp! The ORBIT does not fit this Ramp!

Both the 650 Extension can be added to 500 Curved in minutes. Curved Take off - Straight Landing! 

The 500 Straight Ramp is an ideal safety feature when placed behind a 650 Ramp OR at the end of a 650 Tabletop Drop Off to reduce the height difference. This reduces the chance of a chain ring hang up and an OTB (Over the Bars)!

The 500 Straight is super portable and can easily be thrown in the back of your vehicle for jump sessions away from home.

LAND TO FLAT FACTOR!

Yes - No Problem - Down slope or Landing Ramp provides happier landings 

SENDER PRO PRODUCTS!

All our USA Straight ramps are sold with PRO Tops. Holes are drilled into the surface that allow you to secure T Nut fixings which then allow you to bolt Sender Rumble Strips or Sender Rocks to create more realistic and challenging Trail like scenarios.

Our 500 Straight Ramp bolts onto and works with other Sender features:

• The Wedge (Half Size Tabletop) Coming Soon
• TableTop (Full size Tabletop) IN STORE NOW
• Pump Roller - (Better with 2 Curved Ramps) Coming Soon
• 
  

ASSEMBLY!

You will need a drill driver - 4 mm Drill Bit - TX Torq 25 Driver bit - Pozi 2 Driver bit and 2 x Quick Clamps are useful. It will take 1.5 hr to complete assembly.

SPECIFICATION!

• Folding and Compact for Transportation and Storage
• Peg points on leading edge of ramp to prevent movement
• 2 Bolt points for hooking and securing features
• Strap points for carrying on back
• We use super strong 13 layer - 18 mm Birch Plywood for the Substructure and Surfaces are 18 mm Birch Core Phenolic for added grip and durability
• Stainless Steel Fixing Screws
• Approx Size Unfolded 600 Wide x 1260 Long x 500 High
• Approx Weight 17 kgs

MAKE YOUR SENDER RAMPS LAST A LIFETIME!

DO NOT use Varnish and DO NOT coat Brown Phenolic surfaces. A Low VOC Natural coloured Water Based Decking / Timber Protector will greatly prolong the life of your Sender products if applied to the Birch plywood faces and the cut edges / routered text of the Brown Phenolic Surfaces. You should always store Sender Products inside when not in use. Grease bolts and silicone spray T Nut fixings.

WARNING!

Jumping can go wrong very quickly and lead to serious life threatening injuries or death. Always progress up ramp sizes as you grow your experience and confidence but nothing can rule out an accident. Wear a Full face helmet, Gloves, Knee and Elbow Pads plus Eyewear as a minimum. A neck brace is also an advisable piece of PPE as you attempt bigger jumps . A crash will result in damage to property, equipment and potentially other riders. Always choose a location with plenty of clear run in - run out space and make sure ramps and features are placed flat and all components checked to be secure and in good working order before use.

NOTICE!

Products may vary slightly in shape / size and colour from images. Changes may be made without warning. Please contact Sender USA if you need help, advice or clarity on product selection.

Sender Tabletop Joining Blocks

If you already have a Single Tabletop and purchase a second Tabletop you will need a set of Joining Blocks to Secure and fix the two Tabletops together.

Included:

2 x Plywood Joining Blocks

4 x Countersink M10 Bolts

IMPORTANT NOTE!

These blocks MUST be placed DIRECTLY UNDER the Tabletop Surface and AGAINST the Tabletop Side Panels. They must NOT be mounted on top of the 200 LEGS! This will leave the Tabletop weak and able to flex WHICH WILL result in the Tabletop failing at the join!

If you need help or advice please contact Sender Ramps USA

Sender Rumble Strips

Another World First From Sender!

If you purchase Rumble Strips you WILL NEED the corresponding Nut Pack for the Ramp you have! 

Our Rumble Strips are manufactured from Birch Core Phenolic Plywood. You can use the strips individually or Stack them to create bigger obstacles. We have included extra bolts to make this possible.

Rumble Strips can ONLY be used on our PRO Straight Ramps which have pre-drilled holes that will accept T Nut fixings. These fixings allow you to attach / bolt our Sender Rocks (Coming Soon) or Rumble Strips.

Both Rocks and Rumble Strips are fantastic for coaching because they add complexity to practice session in ascent or descent. You can alter the direction or configuration and depth of the strips and rocks to add or remove difficulty. Moving them takes seconds.

Rumble Strips can also be offset to create Tree Root Scenarios. Make Flatland Session engaging, challenging and progressive.

You can COMBINE Rocks and RUMBLE STRIPS to make Tree Root and Rock Combinations for added REALISM.

A BEGINNER example of using Rumble Strips or Sender Rocks to create a Rock Garden would be to use them on the Straight UP ramp to access a Tabletop. This forces a rider to change body position and apply more pedal power at the correct time to gain the top. Descending through the same Rock Garden creates new challenges in reverse.

An ADVANCED example using Rumble Strips or Sender Rocks to create a Rock Garden is placing them on the LANDING Ramp of a Double or Single Tabletop Set! This would simulate jumping to land into a Rock Garden or Root Section! This can be intimidating for learner riders!

INCLUDES:

• 6 Rumble Strips
• M10 Bolts

If you need help please contact Sender Ramps USA.

ADVICE:

The T Nuts and Bolts are made from BZP - You must look after them. We always recommend storing ramps inside and drying them properly. You should use a grease or copper grease on bolt threads and silicone spray T Nuts to maintain function. 

We strongly advise treating your strips with the same Timber preservative you use on your Sender ramps and features.

You must always locate the Bolt into the T Nut by finger first to prevent CROSS THREADING. It is easy to damage a T Nut. Once on the thread use a 6 mm key to tighten the Bolt.

WARNING:

Always alter your session to meet the skill level of the riders you are working with. Adding Sender Rocks and Rumble Strips can be intimidating and there is some height involved which can result in crashes.