3 products
650 Classic Curved Extension
Regular price $199.99 Sale price $49.99 Save $150.00BUILD CONFIDENCE - DEVELOP SKILLS ON CURVED AND STRAIGHT RAMPS
The 650 Curved Extension is for Advanced riders starting to SUPERSIZE jumping! Our 650 Bolts onto the back of the 500 in minutes! You can then bolt the Orbit onto the 650 to make a monster 800 High Ramp!
The 650 Curved Extension is super portable and can easily be thrown in the back of your vehicle with a 500 Ramp for jump sessions away from home.
LAND TO FLAT FACTOR!
Yes No Problem - However an increased skill level is required to land to flat. A down slope or landing ramp will provide happier landings
Our 650 Curved Extension bolts onto and works with other Sender features:
ASSEMBLY!
You will need a drill driver - 4 mm Drill Bit - TX Torq 25 Driver bit - Pozi 2 Driver bit and 2 x Quick Clamps are useful. It will take 1 hr to complete assembly.
SPECIFICATION!
MAKE YOUR SENDER RAMPS LAST A LIFETIME!
DO NOT use Varnish and DO NOT coat Brown Phenolic surfaces. A Low VOC Natural coloured Water Based Decking / Timber Protector will greatly prolong the life of your Sender products if applied to the Birch plywood faces and the cut edges / routered text of the Brown Phenolic Surfaces. You should always store Sender Products inside when not in use. Grease bolts and silicone spray T Nut fixings.
WARNING!
Jumping can go wrong very quickly and lead to serious life threatening injuries or death. Always progress up ramp sizes as you grow your experience and confidence but nothing can rule out an accident. Wear a Full face helmet, Gloves, Knee and Elbow Pads plus Eyewear as a minimum. A neck brace is also an advisable piece of PPE as you attempt bigger jumps . A crash will result in damage to property, equipment and potentially other riders. Always choose a location with plenty of clear run in - run out space and make sure ramps and features are placed flat and all components checked to be secure and in good working order before use.
NOTICE!
Products may vary slightly in shape / size and colour from images. Changes may be made without warning. Please contact Sender USA if you need help, advice or clarity on product selection.
Orbit Extension
Regular price $49.99 Save $-49.99INSTANTLY UP SIZE YOUR EXISTING RAMP! MAKE THE BIGGEST RAMP IN OUR RANGE!
The ORBIT fits onto CURVED 350 - 500 and 650 Extension Ramp. It instantly boost you to the next size!
The combination of a 500 Ramp with 650 Extension and an Orbit to make an 800 is the ULTIMATE RAMP SET. Up or Downsize your ramp quickly depending on the terrain and riders experience and skill level.
The ORBIT IS NOT Designed for our Straight Ramps and it MUST NOT be used on our 200 Ramps.
The ORBIT is super portable and can easily be thrown in the back of your vehicle with your ramps for jump sessions away from home.
LAND TO FLAT FACTOR!
Yes No Problem - However if you go full SEND at 800 it takes considerable skill to land to flat. We recommend finding a down slope and you will need a Full Suss Bike.
The ORBIT bolts onto and works with:
ASSEMBLY!
You will need a drill driver - TX Torq 25 Driver bit - Pozi 2 Driver bit and 2 x Quick Clamps are useful. It will take 30 Mins to complete assembly.
SPECIFICATION!
MAKE YOUR SENDER RAMPS LAST A LIFETIME!
DO NOT use Varnish and DO NOT coat Brown Phenolic surfaces. A Low VOC Natural coloured Water Based Decking / Timber Protector will greatly prolong the life of your Sender products if applied to the Birch plywood faces and the cut edges / routered text of the Brown Phenolic Surfaces. You should always store Sender Products inside when not in use. Grease bolts and silicone spray T Nut fixings.
WARNING!
Jumping can go wrong very quickly and lead to serious life threatening injuries or death. Always progress up ramp sizes as you grow your experience and confidence but nothing can rule out an accident. Wear a Full face helmet, Gloves, Knee and Elbow Pads plus eye wear as a minimum. A neck brace is also an advisable piece of PPE as you attempt bigger jumps . A crash will result in damage to property, equipment and potentially other riders. Always choose a location with plenty of clear run in - run out space and make sure ramps and features are placed flat and all components checked to be secure and in good working order before use.
NOTICE!
Products may vary slightly in shape / size and colour from images. Changes may be made without warning. Please contact Sender USA if you need help, advice or clarity on product selection.
500 CORE Curved
Regular price $199.99 Save $-199.99INTERNATIONAL DESIGN COPYRIGHT APPLICATION FILED AND PENDING
SUPER STRONG - SUPER COMPACT - MODULAR with SENDER COMPONENTS / FEATURE
Our new CORE RANGE of ramps takes futuristic design and function to the next level. They build on the success of our CLASSIC Range. They are designed to be strong and durable, yet compact. You can unfold them ready for Jumping from Compact or Super Compact mode in minutes. They fit in our Robust colour coded (optional) Carry Bags / Rucksacks. BLUE - 200 - RED - 350 - BLACK - 500
An optional SKATEPLATE instantly makes your ramp suitable for Skateboards and Scooters. SENDER SKATE PLATE product! The Skate Plate is a Durable and Rigid 1.5 mm adjustable Galvanised Steel Plate! NO WEAK PLYWOOD EDGE! Buy a plate with your ramp or RETRO FIT in minutes later.
Each Core Ramp is fixed in height with a small amount of terrain adjustment. The number describes the height in mm. Our 500 mm High, 600 mm Wide Curved Ramp has a Mellow / Sweet 1500 mm long CURVED transition. Perfect for progressing onto bigger tricks, jumps and drops. It is an excellent size and transition for practicing and coaching bigger jumping skills and techniques beyond trail centre sized height and distance and onto Bikepark / Dirt Jump sized features.
It is important to learn to jump off Straight and Curved Ramps but it is better / easier to hit the sweet spot and land on a STRAIGHT Ramp.
The Core 500 is ideally suited to work WITH an EXPERT Progression Ramp.
INSTANTLY INCREASE THE LENGTH OF TRANSITION AND HEIGHT of your ramp with the SENDER EXTENDER! Makes your 500 - 650 High! and 1825 mm long transition. CHECK OUT THE CORE 500 ULTIMATE RAMP SET.
CORE Ramps will fit in your van, car, motorhome so you can take them on trips. Core ramps are fantastic for HEAVY DUTY Coach or Club use.
CORE RAMPS ARE PART OF OUR EXTENSIVE AND COMPREHENSIVE MODULAR SYSTEM. Easily Mount Ramps onto Components and Features such as our Pump Roller / Compression Roller and Tabletop to create realistic TRAIL Scenarios.
IMPORTANT NOTE:
Our ASSEMBLY CHARGE covers the time to build your ramp AND additional CUSTOM packaging time and materials.
RAMP BAG NOT INCLUDED - PLEASE GO TO HERE TO PURCHASE
WEIGHT LIMIT: 150 kgs SWL - Dynamic Testing to 350 kgs!
ENVIRONMENTALLY FRIENDLY: You can buy our REFRESH KIT to replace and renew worn out components!
SCOOTER AND SKATEBOARD COMPATIBLE: YES - With the Bolt On "Skate Plate"! The SKATE PLATE does not come with the standard pack.
RIDERS, COACHES and CLUBS: The Perfect Ramp to SUPERSIZE your Jumping Skills - An excellent intermediate ramp with the option to extend to 650 mm HIGH !
SENDER SURFACE: A GRIPPY hard wearing RESIN Grid surface for all conditions
COACHING SURFACE: Please get in touch if you would like our PRO Coaching Surface added to your ramps - support@sender-ramps.com (0044) 07719 309214
WEIGHT: 18 kgs
BAG COLOUR / Material: Red - Heavy Duty Vinyl with Adjustable Straps. Optional.
STABILTY: Stable on grass, gravel or concrete due to shape and weight
MODE: Fixed Height
EXTENDER / ORBIT COMPATIBLE: Compatible with the EXTENDER but NOT compatible with the Orbit.
SECURE - Use our PEG points / holes on the front to prevent movement on grass.
SOLID - A ramp for LIFE - Construction from 18 mm (13 Layer) Birch plywood and Stainless Steel Fixings. NO ELASTIC! NO CHEAP FAR EASTERN / SHEATHING PLY!
MODULAR: CORE Range products work with other Sender Components at set Heights - 200 / 350 / 500 Check for compatability and select the correct leg lengths.
COMPACT: Easy to move and carry once assembled in JUMP Mode. Folds quickly to fit in a car or van - Can be made VERY compact by unbolting and placing in our Ramp Bag.
LANDING RAMP: Not Essential - You can land this ramp to flat or a grass down slope
TRANSITION - 1500 mm Long
SENDER BUILD QUALITY: 18mm (13 Layer) Birch Plywood Sides with 18mm (13 Layer) Birch Core GRIP Phenolic Surface. Stainless Steel Fixings. BOMBPROOF.
CUSTOM BRANDING : Add your Personal / Shop / Business IDENTITY! Contact: mike@sender-rampsusa.com with a Vector File / Logo and we will send you a custom quote for artwork and CNC Cutting your TRAINER.
ASSEMBLED OR UNASSEMBLED: Save money by choosing to SELF Assemble your ramp OR Choose Assembled and we can do it for you! Self Assembly takes approx 1 hour with basic tools.
RAMP FOR LIFE and PRODUCT CARE - Always Store and dry your ramp inside. Treat cut edges and plywood faces with a LOW VOC Natural Coloured water based decking protector such as Ronseal. Spray and grease bolts and fixings. Spare parts are available!
USER WARNING / SAFETY: Jumping at any height is dangerous and can result in serious injury to yourself and others. ALWAYS wear a helmet, gloves and pads. Eyewear, a full face helmet and a neck brace are advisable. Always inspect your ramp for damage and secure ALL bolts before use. ALWAYS locate your ramp with good safe approach and exit. Landing on grass provides a more forgiving landing. If placed on concrete or tar ensure it does not slide. Start low, consolidate techniques and progress height with skill and confidence.
IMAGES - Please note that images are illustrative and the product may vary slightly from that advertised.