Sender 200 Curved Ramp

PRE-ORDER FOR LATE SEPTEMBER 

BUILD CONFIDENCE - DEVELOP SKILLS ON CURVED AND STRAIGHT RAMPS

The 200 Curved has a sweet curved take off perfect for beginners but equally as important for Senders looking to improve and refine jumping skills. Advanced Riders should be able to Huck High and Far on the 200 or increase skills and difficulty by stepping up to land on a higher Tabletop or land down a 350 or 500 Straight Ramp. 

The 200 Ramp is an ideal safety feature when placed behind a 350 Ramp OR at the end of a 350 Tabletop Drop Off to reduce the height difference. This reduces the chance of a chain ring hang up and an OTB (Over the Bars)!

The 200 is super portable and can easily be thrown in the back of your vehicle for jump sessions away from home.

LAND TO FLAT FACTOR!

Yes - No Problem

Our 200 Curved Ramp bolts onto or works with other Sender features:

• The Wedge (Half Size Tabletop) 
• TableTop (Full size Tabletop) 
• Pump Roller - 
• Balance Beam for Roll on - Roll Off 

ASSEMBLY!

You will need a drill driver - 4 mm Drill Bit - TX Torq 25 Driver bit - Pozi 2 Driver bit and 2 x Quick Clamps are useful. It will take 1 hr to complete assembly.

SPECIFICATION!

• Peg points on leading edge of ramp to prevent movement
• 2 Bolt points for hooking and securing features
• Strap points for carrying on back
• We use super strong 13 layer - 18 mm Birch Plywood for the Substructure and Surfaces are 18 mm Birch Core Phenolic for added grip and durability
• Stainless Steel Fixing Screws
• Approx Size Unfolded 600 Wide x 650 Long x 200 High
• Approx Weight 7 kgs

MAKE YOUR SENDER RAMPS LAST A LIFETIME!

DO NOT use Varnish and DO NOT coat Brown Phenolic surfaces. A Low VOC Natural coloured Water Based Decking / Timber Protector will greatly prolong the life of your Sender products if applied to the Birch plywood faces and the cut edges / routered text of the Brown Phenolic Surfaces. You should always store Sender Products inside when not in use. Grease bolts and silicone spray T Nut fixings.

WARNING!

Jumping can go wrong very quickly and lead to serious life threatening injuries or death. Always progress up ramp sizes as you grow your experience and confidence but nothing can rule out an accident. Wear a Full face helmet, Gloves, Knee and Elbow Pads plus Eyewear as a minimum. A neck brace is also an advisable piece of PPE as you attempt bigger jumps . A crash will result in damage to property, equipment and potentially other riders. Always choose a location with plenty of clear run in - run out space and make sure ramps and features are placed flat and all components checked to be secure and in good working order before use. 

NOTICE!

Products may vary slightly in shape / size and colour from images. Changes may be made without warning. Please contact Sender USA if you need help, advice or clarity on product selection.

Sender 200 PRO Straight Ramp

PRE-ORDER FOR LATE SEPTEMBER 

BUILD CONFIDENCE - DEVELOP SKILLS ON CURVED AND STRAIGHT RAMPS

The Sender 200 Straight Ramp is the perfect beginners / starter ramp. Easy to FLY OFF of with NO KICK. It is excellent in combination with a 200 Curved Ramp. Straight ramps are much better for landing on because the SWEET spot is longer. Landing on a curved ramp is more advanced and requires more skill and control especially to carry speed by pumping the transition. Curved Take off - Straight Landing!

Advanced Riders should still be able to Huck High and Far on the 200. 

The 200 Straight Ramp is an ideal safety feature when placed behind a 350 Ramp OR at the end of a 350 Tabletop Drop Off to reduce the height difference. This reduces the chance of a chain ring hang up and an OTB (Over the Bars)!

The 200 Straight is super portable and can easily be thrown in the back of your vehicle for jump sessions away from home.

LAND TO FLAT FACTOR!

Yes - No Problem

SENDER PRO PRODUCTS!

All our USA Straight ramps are sold with PRO Tops. Holes are drilled into the surface that allow you to secure T Nut fixings which then allow you to bolt Sender Rumble Strips or Sender Rocks to create more realistic and challenging Trail like scenarios.

Our 200 Straight Ramp bolts onto and works with other Sender features:

• The Wedge (Half Size Tabletop) Coming Soon
• TableTop (Full size Tabletop) IN STORE NOW
• Pump Roller - (Better with 2 Curved Ramps) Coming Soon
• Balance Beam for Roll on - Roll Off - Coming Soon

ASSEMBLY!

You will need a drill driver - 4 mm Drill Bit - TX Torq 25 Driver bit - Pozi 2 Driver bit and 2 x Quick Clamps are useful. It will take 1 hr to complete assembly.

SPECIFICATION!

• Peg points on leading edge of ramp to prevent movement
• 2 Bolt points for hooking and securing features
• Strap points for carrying on back
• We use super strong 13 layer - 18 mm Birch Plywood for the Substructure and Surfaces are 18 mm Birch Core Phenolic for added grip and durability
• Stainless Steel Fixing Screws
• Approx Size Unfolded 600 Wide x 650 Long x 200 High
• Approx Weight 7 kgs

MAKE YOUR SENDER RAMPS LAST A LIFETIME!

DO NOT use Varnish and DO NOT coat Brown Phenolic surfaces. A Low VOC Natural coloured Water Based Decking / Timber Protector will greatly prolong the life of your Sender products if applied to the Birch plywood faces and the cut edges / routered text of the Brown Phenolic Surfaces. You should always store Sender Products inside when not in use. Grease bolts and silicone spray T Nut fixings.

WARNING!

Jumping can go wrong very quickly and lead to serious life threatening injuries or death. Always progress up ramp sizes as you grow your experience and confidence but nothing can rule out an accident. Wear a Full face helmet, Gloves, Knee and Elbow Pads plus Eyewear as a minimum. A neck brace is also an advisable piece of PPE as you attempt bigger jumps . A crash will result in damage to property, equipment and potentially other riders. Always choose a location with plenty of clear run in - run out space and make sure ramps and features are placed flat and all components checked to be secure and in good working order before use. 

NOTICE!

Products may vary slightly in shape / size and colour from images. Changes may be made without warning. Please contact Sender USA if you need help, advice or clarity on product selection.

Sender 350 Curved Ramp 

PRE-ORDER FOR LATE SEPTEMBER 

Our KEY STONE ramp at the perfect height that works with so many products!

BUILD CONFIDENCE - DEVELOP SKILLS ON CURVED AND STRAIGHT RAMPS

The 350 Curved has a sweet curved take off perfect for Intermediate riders.  Advanced Riders can send it High and Far on the 350 or increase skills and difficulty by stepping up to land on a higher Tabletop or land down a 500 or 650 Straight Ramp. 

The 350 Curved Ramp is an ideal safety feature when placed behind a 500 Ramp OR at the end of a 500 Tabletop Drop Off to reduce the height difference. This reduces the chance of a chain ring hang up and an OTB (Over the Bars)!

The 350 is super portable and can easily be thrown in the back of your vehicle for jump sessions away from home.

LAND TO FLAT FACTOR!

Yes - No Problem Down slope or Landing Ramp provides happier landings

Our 350 Curved Ramp bolts onto and works with other Sender features:

• The Wedge (Half Size Tabletop) 
• Tabletop (Full size Tabletop) 
• Pump Roller - (Curved to Curved is Perfect) 
• Seesaw - Creates a High Beam using the BOOSTER Kit 
• Compression Roller 

ASSEMBLY!

You will need a drill driver - 4 mm Drill Bit - TX Torq 25 Driver bit - Pozi 2 Driver bit and 2 x Quick Clamps are useful. It will take 1 hr to complete assembly.

SPECIFICATION!

• Folding and Compact for Transportation and Storage
• Peg points on leading edge of ramp to prevent movement
• 2 Bolt points for hooking and securing features
• Strap points for carrying on back
• We use super strong 13 layer - 18 mm Birch Plywood for the Substructure and Surfaces are 18 mm Birch Core Phenolic for added grip and durability
• Stainless Steel Fixing Screws
• Approx Size Unfolded 600 Wide x 980 Long x 350 High
• Approx Weight 13 kgs

MAKE YOUR SENDER RAMPS LAST A LIFETIME!

DO NOT use Varnish and DO NOT coat Brown Phenolic surfaces. A Low VOC Natural coloured Water Based Decking / Timber Protector will greatly prolong the life of your Sender products if applied to the Birch plywood faces and the cut edges / routered text of the Brown Phenolic Surfaces. You should always store Sender Products inside when not in use. Grease bolts and silicone spray T Nut fixings.

WARNING!

Jumping can go wrong very quickly and lead to serious life threatening injuries or death. Always progress up ramp sizes as you grow your experience and confidence but nothing can rule out an accident. Wear a Full face helmet, Gloves, Knee and Elbow Pads plus Eyewear as a minimum. A neck brace is also an advisable piece of PPE as you attempt bigger jumps . A crash will result in damage to property, equipment and potentially other riders. Always choose a location with plenty of clear run in - run out space and make sure ramps and features are placed flat and all components checked to be secure and in good working order before use.

NOTICE!

Products may vary slightly in shape / size and colour from images. Changes may be made without warning. Please contact Sender USA if you need help, advice or clarity on product selection.

Sender 500 Curved Ramp 

PRE-ORDER FOR LATE SEPTEMBER 

BUILD CONFIDENCE - DEVELOP SKILLS ON CURVED AND STRAIGHT RAMPS

The 500 Curved has a sweet take off perfect for Advanced riders sending it "To the Sky". Our 500 Curved forms the base ramp for the 650 Bolt on Extension and Bolt on Orbit which can be added to make this a monster "Huck To Flat" 800 High Ramp!

Both the 650 Extension and Orbit can be added to or removed from the 500 Curved in minutes. The Orbit can be attached directly to the 500 to instantly transform it to a 650 High Ramp! 

The 500 is super portable and can easily be thrown in the back of your vehicle for jump sessions away from home.

LAND TO FLAT FACTOR!

Yes - No Problem - Down slope or Landing Ramp provides happier landings

Our 500 Curved Ramp bolts onto and works with other Sender features:

• The Wedge (Half Size Tabletop)
• Tabletop (Full size Tabletop) 
• Pump Roller - (Curved to Curved is Perfect) 
• 650 Curved Extension - Turn your 500 into a 650 Ramp
• Orbit - Bolts onto your 500 to make a 650 OR 650 to make an 800!

ASSEMBLY!

You will need a drill driver - 4 mm Drill Bit - TX Torq 25 Driver bit - Pozi 2 Driver bit and 2 x Quick Clamps are useful. It will take 1.5 hr to complete assembly.

SPECIFICATION!

• Folding and Compact for Transportation and Storage
• Peg points on leading edge of ramp to prevent movement
• 2 Bolt points for hooking and securing features
• Strap points for carrying on back
• We use super strong 13 layer - 18 mm Birch Plywood for the Substructure and Surfaces are 18 mm Birch Core Phenolic for added grip and durability
• Stainless Steel Fixing Screws
• Approx Size Unfolded 600 Wide x 1250 Long x 500 High
• Approx Weight 17 kgs

MAKE YOUR SENDER RAMPS LAST A LIFETIME!

DO NOT use Varnish and DO NOT coat Brown Phenolic surfaces. A Low VOC Natural coloured Water Based Decking / Timber Protector will greatly prolong the life of your Sender products if applied to the Birch plywood faces and the cut edges / routered text of the Brown Phenolic Surfaces. You should always store Sender Products inside when not in use. Grease bolts and silicone spray T Nut fixings.

WARNING!

Jumping can go wrong very quickly and lead to serious life threatening injuries or death. Always progress up ramp sizes as you grow your experience and confidence but nothing can rule out an accident. Wear a Full face helmet, Gloves, Knee and Elbow Pads plus Eyewear as a minimum. A neck brace is also an advisable piece of PPE as you attempt bigger jumps . A crash will result in damage to property, equipment and potentially other riders. Always choose a location with plenty of clear run in - run out space and make sure ramps and features are placed flat and all components checked to be secure and in good working order before use.

NOTICE!

Products may vary slightly in shape / size and colour from images. Changes may be made without warning. Please contact Sender USA if you need help, advice or clarity on product selection.

Sender 500 Pro Straight Ramp 

BUILD CONFIDENCE - DEVELOP SKILLS ON CURVED AND STRAIGHT RAMPS

The Sender 500 Straight Ramp is the perfect Advanced ramp. Straight ramps are much better for landing on because the SWEET spot is longer. Landing on a curved ramp is more advanced and requires more skill and control especially to carry speed by pumping the transition.

Our 500 Straight forms the base ramp for the 650 Bolt on Extension which can be added to make this a monster "Huck To Flat" Ramp! The ORBIT does not fit this Ramp!

Both the 650 Extension can be added to 500 Curved in minutes. Curved Take off - Straight Landing! 

The 500 Straight Ramp is an ideal safety feature when placed behind a 650 Ramp OR at the end of a 650 Tabletop Drop Off to reduce the height difference. This reduces the chance of a chain ring hang up and an OTB (Over the Bars)!

The 500 Straight is super portable and can easily be thrown in the back of your vehicle for jump sessions away from home.

LAND TO FLAT FACTOR!

Yes - No Problem - Down slope or Landing Ramp provides happier landings 

SENDER PRO PRODUCTS!

All our USA Straight ramps are sold with PRO Tops. Holes are drilled into the surface that allow you to secure T Nut fixings which then allow you to bolt Sender Rumble Strips or Sender Rocks to create more realistic and challenging Trail like scenarios.

Our 500 Straight Ramp bolts onto and works with other Sender features:

• The Wedge (Half Size Tabletop) Coming Soon
• TableTop (Full size Tabletop) IN STORE NOW
• Pump Roller - (Better with 2 Curved Ramps) Coming Soon
• 
  

ASSEMBLY!

You will need a drill driver - 4 mm Drill Bit - TX Torq 25 Driver bit - Pozi 2 Driver bit and 2 x Quick Clamps are useful. It will take 1.5 hr to complete assembly.

SPECIFICATION!

• Folding and Compact for Transportation and Storage
• Peg points on leading edge of ramp to prevent movement
• 2 Bolt points for hooking and securing features
• Strap points for carrying on back
• We use super strong 13 layer - 18 mm Birch Plywood for the Substructure and Surfaces are 18 mm Birch Core Phenolic for added grip and durability
• Stainless Steel Fixing Screws
• Approx Size Unfolded 600 Wide x 1260 Long x 500 High
• Approx Weight 17 kgs

MAKE YOUR SENDER RAMPS LAST A LIFETIME!

DO NOT use Varnish and DO NOT coat Brown Phenolic surfaces. A Low VOC Natural coloured Water Based Decking / Timber Protector will greatly prolong the life of your Sender products if applied to the Birch plywood faces and the cut edges / routered text of the Brown Phenolic Surfaces. You should always store Sender Products inside when not in use. Grease bolts and silicone spray T Nut fixings.

WARNING!

Jumping can go wrong very quickly and lead to serious life threatening injuries or death. Always progress up ramp sizes as you grow your experience and confidence but nothing can rule out an accident. Wear a Full face helmet, Gloves, Knee and Elbow Pads plus Eyewear as a minimum. A neck brace is also an advisable piece of PPE as you attempt bigger jumps . A crash will result in damage to property, equipment and potentially other riders. Always choose a location with plenty of clear run in - run out space and make sure ramps and features are placed flat and all components checked to be secure and in good working order before use.

NOTICE!

Products may vary slightly in shape / size and colour from images. Changes may be made without warning. Please contact Sender USA if you need help, advice or clarity on product selection.

Sender 650 Curved Extension 

BUILD CONFIDENCE - DEVELOP SKILLS ON CURVED AND STRAIGHT RAMPS

The 650 Curved Extension is for Advanced riders starting to SUPERSIZE jumping! Our 650 Bolts onto the back of the 500 in minutes! You can then bolt the Orbit onto the 650 to make a monster 800 High Ramp!

The 650 Curved Extension is super portable and can easily be thrown in the back of your vehicle with a 500 Ramp for jump sessions away from home.

LAND TO FLAT FACTOR!

Yes No Problem - However an increased skill level is required to land to flat. A down slope or landing ramp will provide happier landings

Our 650 Curved Extension bolts onto and works with other Sender features:

• The Wedge (Half Size Tabletop) Coming Soon
• Tabletop (Full size Tabletop) IN STORE NOW
• Pump Roller - (Curved to Curved is Perfect) IN STORE NOW
• 500 Curved Ramp - Turn your 500 into a 650 Ramp IN STORE NOW
• Orbit - Bolts onto your 650 to make an 800! IN STORE NOW

ASSEMBLY!

You will need a drill driver - 4 mm Drill Bit - TX Torq 25 Driver bit - Pozi 2 Driver bit and 2 x Quick Clamps are useful. It will take 1 hr to complete assembly.

SPECIFICATION!

• Folding and Compact for Transportation and Storage
• 2 Bolt points for hooking and securing features
• Strap points for securing legs
• We use super strong 13 layer - 18 mm Birch Plywood for the Substructure and Surfaces are 18 mm Birch Core Phenolic for added grip and durability
• Stainless Steel Fixing Screws
• Approx Size Folded 600 Wide x 270 Long x 650 High
• Approx Weight 7.5 kgs

MAKE YOUR SENDER RAMPS LAST A LIFETIME!

DO NOT use Varnish and DO NOT coat Brown Phenolic surfaces. A Low VOC Natural coloured Water Based Decking / Timber Protector will greatly prolong the life of your Sender products if applied to the Birch plywood faces and the cut edges / routered text of the Brown Phenolic Surfaces. You should always store Sender Products inside when not in use. Grease bolts and silicone spray T Nut fixings.

WARNING!

Jumping can go wrong very quickly and lead to serious life threatening injuries or death. Always progress up ramp sizes as you grow your experience and confidence but nothing can rule out an accident. Wear a Full face helmet, Gloves, Knee and Elbow Pads plus Eyewear as a minimum. A neck brace is also an advisable piece of PPE as you attempt bigger jumps . A crash will result in damage to property, equipment and potentially other riders. Always choose a location with plenty of clear run in - run out space and make sure ramps and features are placed flat and all components checked to be secure and in good working order before use.

NOTICE!

Products may vary slightly in shape / size and colour from images. Changes may be made without warning. Please contact Sender USA if you need help, advice or clarity on product selection.

Sender Rumble Strips

Another World First From Sender!

If you purchase Rumble Strips you WILL NEED the corresponding Nut Pack for the Ramp you have! 

Our Rumble Strips are manufactured from Birch Core Phenolic Plywood. You can use the strips individually or Stack them to create bigger obstacles. We have included extra bolts to make this possible.

Rumble Strips can ONLY be used on our PRO Straight Ramps which have pre-drilled holes that will accept T Nut fixings. These fixings allow you to attach / bolt our Sender Rocks (Coming Soon) or Rumble Strips.

Both Rocks and Rumble Strips are fantastic for coaching because they add complexity to practice session in ascent or descent. You can alter the direction or configuration and depth of the strips and rocks to add or remove difficulty. Moving them takes seconds.

Rumble Strips can also be offset to create Tree Root Scenarios. Make Flatland Session engaging, challenging and progressive.

You can COMBINE Rocks and RUMBLE STRIPS to make Tree Root and Rock Combinations for added REALISM.

A BEGINNER example of using Rumble Strips or Sender Rocks to create a Rock Garden would be to use them on the Straight UP ramp to access a Tabletop. This forces a rider to change body position and apply more pedal power at the correct time to gain the top. Descending through the same Rock Garden creates new challenges in reverse.

An ADVANCED example using Rumble Strips or Sender Rocks to create a Rock Garden is placing them on the LANDING Ramp of a Double or Single Tabletop Set! This would simulate jumping to land into a Rock Garden or Root Section! This can be intimidating for learner riders!

INCLUDES:

• 6 Rumble Strips
• M10 Bolts

If you need help please contact Sender Ramps USA.

ADVICE:

The T Nuts and Bolts are made from BZP - You must look after them. We always recommend storing ramps inside and drying them properly. You should use a grease or copper grease on bolt threads and silicone spray T Nuts to maintain function. 

We strongly advise treating your strips with the same Timber preservative you use on your Sender ramps and features.

You must always locate the Bolt into the T Nut by finger first to prevent CROSS THREADING. It is easy to damage a T Nut. Once on the thread use a 6 mm key to tighten the Bolt.

WARNING:

Always alter your session to meet the skill level of the riders you are working with. Adding Sender Rocks and Rumble Strips can be intimidating and there is some height involved which can result in crashes.

Sender PRO Straight Ramp Nut Packs

Another World First From Sender!

Our PRO Straight Ramps have pre-drilled holes which will accept T Nut fixings. These fixings allow you to attach / bolt our Sender Rocks (Coming Soon) or Rumble Strips.

Both Rocks and Rumble Strips are fantastic for coaching because they add complexity to practice session in ascent or descent. You can alter the direction or configuration and depth of the strips and rocks to add or remove difficulty. Moving them takes seconds.

Rumble Strips can also be offset to create Tree Root Scenarios. Make Flatland Session engaging, challenging and progressive.

A BEGINNER example of using Rumble Strips or Sender Rocks to create a Rock Garden would be to use them on the Straight UP ramp to access a Tabletop. This forces a rider to change body position and apply more pedal power at the correct time to gain the top. Descending through the same Rock Garden creates new challenges in reverse.

An ADVANCED example using Rumble Strips or Sender Rocks to create a Rock Garden is placing them on the LANDING Ramp of a Double or Single Tabletop Set! This would simulate jumping to land into a Rock Garden or Root Section! This can be intimidating for learner riders!

Each pack includes T Nuts and Screws for self installation! Simply choose the Nut Pack to match your ramp size.

If you need help please contact Sender Ramps USA.

ADVICE:

The T Nuts are made from BZP - You must look after them. We always recommend storing ramps inside and drying them properly. You should use a grease or copper grease on bolt threads and silicone spray T Nuts to maintain function. 

WARNING:

Always alter your session to meet the skill level of the riders you are working with. Adding Sender Rocks and Rumble Strips can be intimidating and there is some height involved which can result in crashes.

ADVANCED PROGRESSION RAMP

12 RAMPS IN 1!

HEIGHT RANGE 350 TO 500

SUITABLE FOR MTB - SCOOTERS - BMX - SKATEBOARDS

INTERNATIONAL DESIGN COPYRIGHT APPLICATION FILED AND PENDING

SUPER STRONG - SUPER COMPACT - SUPER PORTABLE - SUPER ADJUSTABLE MODULAR with SENDER FEATURES

MARKET LEADING - UNIQUE RAMP DESIGN - STRONGER AND MORE ADJUSTABLE THAN ANY OTHER RAMPS ON THE MARKET - COMPATIBLE WITH SENDER PRODUCTS TO CREATE REALISTIC TRAIL SCENARIOS

IMPROVE YOUR JUMPING FASTER! At Sender it is all about PROGRESSION. Our ramps and features are designed to help you gain confidence quickly at your level. It has never been easier to adjust your ramp to PERFECT your SKILLS. You can CUSTOMIZE your take off to be STRAIGHT, CURVED or EXTRA CURVED!

You can MICRO adjust (FINE TUNE) the HEIGHT of your take off from 350 to 500 mm High and adjust the feet for UNEVEN Terrain.

SENDER RAPID SET UP AND ADJUSTMENT SYSTEM!

Sender PROgression ramps can be used with SKATEBOARDS and SCOOTERS by bolting on our SKATE PLATE product! The Skate Plate is a Durable and Rigid 2mm adjustable Galvanised Steel Plate! NO WEAK PLYWOOD EDGE!

CARRY your ramp to the car / park / club or venue easily in our OPTIONAL Heavy Duty Colour Coded Bag.

You can mount other SENDER Ramps and Features such as our Pump Roller / Compression Roller and Tabletop to create realistic TRAIL Scenarios. You can use your PROGRESSION ramp as a TAKE OFF or LANDING RAMP.

WEIGHT LIMIT: 150 kgs SWL - Dynamic Testing to 450 kgs!

ENVIRONMENTALLY FRIENDLY: You can buy our REFRESH KIT to replace and renew worn out components!

SCOOTER AND SKATEBOARD COMPATIBLE: YES - With the Bolt On "Skate Plate"! The SKATE PLATE does not come with standard pack.

RIDERS, COACHES and CLUBS: The Perfect Ramp to ADVANCE your Jumping Skills

SENDER SURFACE: A GRIPPY hard wearing RESIN surface for all conditions

COACHING SURFACE: Please get in touch if you would like our PRO Coaching Surface added to your ramps - support@sender-ramps.com (0044) 07719 309214

WEIGHT: 17.5 kgs

BAG COLOUR / Material: Red - Heavy Duty Vinyl with Adjustable Straps. 

STABILTY: Stable on grass, gravel or concrete due to shape and weight - Special Terrain Adjustment Legs

MODE: Adjustable from 350 to 500 mm with 3 Angle Settings - Straight - Curved - Curved +

ORBIT COMPATIBLE: NOT compatible

SECURE - Use our PEG points / holes on the front to prevent movement on grass.

SOLID - A ramp for LIFE - Construction from 18 mm (13 Layer) Birch plywood and Stainless Steel Fixings. No Elastic!

MODULAR: The Progression Range works with our CORE Range products at SET / SPECIFIC Heights - 200 / 350 / 500 / 650. Coming Soon Sender Progression Tabletop!

COMPACT / PORTABLE: Easy to move and carry once assembled in JUMP Mode. Folds quickly to fit in a car or van - Can be made VERY compact by unbolting and placing in our PROGRESSION Ramp Bag.

COMPACT FOLDED SIZE: Set Up Time - 2 Minute

SUPER COMPACT BAG SIZE: Set Up Time  - 5 Minutes

DIMENSIONS UNFOLDED at 350 Height: 

LANDING RAMP: Not Essential - You can land this ramp to flat or a grass down slope

TRANSITION - 1200 mm Long

SENDER BUILD QUALITY: 18mm (13 Layer) Birch Plywood Sides with 18mm (13 Layer) Birch Core GRIP Phenolic Surface. Stainless Steel Fixings. BOMBPROOF.

CUSTOM BRANDING : Add your Personal / Shop / Business IDENTITY! Contact: support@sender-ramps.com with a Vector File / Logo and we will send you a custom quote for artwork and CNC Cutting your TRAINER.

ASSEMBLED OR UNASSEMBLED: Save money by choosing to SELF Assemble your ramp OR Choose Assembled and we can do it for you! Self Assembly takes approx 1 hour with basic tools.

RAMP FOR LIFE and PRODUCT CARE - Always Store and dry your ramp inside. Treat cut edges and plywood faces with a LOW VOC Natural Coloured water based decking protector such as Ronseal. Spray and grease bolts and fixings. Spare parts are available!

USER WARNING / SAFETY: Jumping at any height is dangerous and can result in serious injury to yourself and others. ALWAYS wear a helmet, gloves and pads. Eyewear, a full face helmet and a neck brace are advisable. Always inspect your ramp for damage and secure ALL bolts before use. ALWAYS locate your ramp with good safe approach and exit. Landing on grass provides a more forgiving landing. If placed on concrete or tar ensure it does not slide. Start low, consolidate techniques and progress height with skill and confidence. 

IMAGES - Please note that images are illustrative and the product may vary slightly from that advertised.

EXPERT PROGRESSION RAMP

12 RAMPS IN 1!

HEIGHT RANGE 500 TO 650

SUITABLE FOR MTB - SKATEBOARDS - SCOOTERS - BMX

INTERNATIONAL DESIGN COPYRIGHT APPLICATION FILED AND PENDING

SUPER STRONG - SUPER COMPACT - SUPER PORTABLE - SUPER ADJUSTABLE MODULAR with SENDER FEATURES

MARKET LEADING - UNIQUE RAMP DESIGN - STRONGER AND MORE ADJUSTABLE THAN ANY OTHER RAMPS ON THE MARKET - COMPATIBLE WITH SENDER PRODUCTS TO CREATE REALISTIC TRAIL SCENARIOS

IMPROVE YOUR JUMPING FASTER! At Sender it is all about PROGRESSION. Our ramps and features are designed to help you gain confidence quickly at your level. It has never been easier to adjust your ramp to PERFECT your SKILLS. You can CUSTOMIZE your take off to be STRAIGHT, CURVED or EXTRA CURVED!

You can MICRO adjust (FINE TUNE) the HEIGHT of your take off from 500 to 650 mm High and adjust the feet for UNEVEN Terrain.

SENDER RAPID SET UP AND ADJUSTMENT SYSTEM

Sender PROgression ramps can be used with SKATEBOARDS and SCOOTERS by bolting on our SKATE PLATE product! The Skate Plate is a Durable and Rigid 2mm adjustable Galvanised Steel Plate! NO WEAK SANDED PLYWOOD EDGE!

CARRY your ramp to the car / park / club or venue easily in our OPTIONAL Heavy Duty Colour Coded Bag.

You can mount other SENDER Ramps and Features such as our Pump Roller / Compression Roller and Tabletop to create realistic TRAIL Scenarios. You can use your PROGRESSION ramp as a TAKE OFF or LANDING RAMP.

WEIGHT LIMIT: 150 kgs SWL - Dynamic Testing to 450 kgs!

ENVIRONMENTALLY FRIENDLY: You can buy our REFRESH KIT to replace and renew worn out components!

SCOOTER AND SKATEBOARD COMPATIBLE: YES - With the Bolt On "Skate Plate"! The SKATE PLATE does not come with standard pack.

RIDERS, COACHES and CLUBS: The Perfect Ramp to ADVANCE your Jumping Skills

SENDER SURFACE: A GRIPPY hard wearing RESIN surface for all conditions

COACHING SURFACE: Please get in touch if you would like our PRO Coaching Surface added to your ramps - support@sender-ramps.com (0044) 07719 309214

WEIGHT: 24 kgs

BAG COLOUR / Material: Black - Heavy Duty Vinyl with Adjustable Straps. 

STABILTY: Stable on grass, gravel or concrete due to shape and weight - Special Terrain Adjustment Legs

MODE: Adjustable from 500 to 650 mm with 3 Angle Settings - Straight - Curved - Curved +

ORBIT COMPATIBLE: NOT compatible

SECURE - Use our PEG points / holes on the front to prevent movement on grass.

SOLID - A ramp for LIFE - Construction from 18 mm (13 Layer) Birch plywood and Stainless Steel Fixings. No Elastic!

MODULAR: The Progression Range works with our CORE Range products at SET / SPECIFIC Heights - 200 / 350 / 500 / 650. Coming Soon Sender Progression Tabletop!

COMPACT / PORTABLE: Easy to move and carry once assembled in JUMP Mode. Folds quickly to fit in a car or van - Can be made VERY compact by unbolting and placing in our PROGRESSION Ramp Bag.

COMPACT FOLDED SIZE: Set Up Time 2 Minute

SUPER COMPACT BAG SIZE: Set Up Time 5 Minutes

DIMENSIONS UNFOLDED at 500 Height: 

LANDING RAMP: Not Essential - You can land this ramp to flat or a grass down slope

TRANSITION - 1500 mm Long

SENDER BUILD QUALITY: 18mm (13 Layer) Birch Plywood Sides with 18mm (13 Layer) Birch Core GRIP Phenolic Surface. Stainless Steel Fixings. BOMBPROOF.

CUSTOM BRANDING : Add your Personal / Shop / Business IDENTITY! Contact: support@sender-ramps.com with a Vector File / Logo and we will send you a custom quote for artwork and CNC Cutting your TRAINER.

ASSEMBLED OR UNASSEMBLED: Save money by choosing to SELF Assemble your ramp OR Choose Assembled and we can do it for you! Self Assembly takes approx 1 hour with basic tools.

RAMP FOR LIFE and PRODUCT CARE - Always Store and dry your ramp inside. Treat cut edges and plywood faces with a LOW VOC Natural Coloured water based decking protector such as Ronseal. Spray and grease bolts and fixings. Spare parts are available!

USER WARNING / SAFETY: Jumping at any height is dangerous and can result in serious injury to yourself and others. ALWAYS wear a helmet, gloves and pads. Eyewear, a full face helmet and a neck brace are advisable. Always inspect your ramp for damage and secure ALL bolts before use. ALWAYS locate your ramp with good safe approach and exit. Landing on grass provides a more forgiving landing. If placed on concrete or tar ensure it does not slide. Start low, consolidate techniques and progress height with skill and confidence. 

IMAGES - Please note that images are illustrative and the product may vary slightly from that advertised.

NEW SENDER PROGRESSION PUMP / COMPRESSION ROLLER

Please note images show Old Model / Version.

The NEW Roller will FIT Between all of our RAMP RANGES CLASSIC / CORE and PROGRESSION. It can also be used as a Compression Roller.

The product requires 2 x Ramps. The PUMP ROLLER is ONLY the central component that BOLTS ONTO other ramps. It fits between 200 / 350 / 500 Core and Progression Ramps.

PRE ORDER NOW!

IMAGES ARE ILLUSTRATIVE ONLY!

12 RAMPS IN 1!

HEIGHT RANGE 200mm TO 350mm

SUITABLE FOR MTB - SCOOTERS - BMX - SKATEBOARDS

MARKET LEADING - UNIQUE RAMP DESIGN - STRONGER AND MORE ADJUSTABLE THAN ANY OTHER RAMPS ON THE MARKET - COMPATIBLE WITH SENDER PRODUCTS TO CREATE REALISTIC TRAIL SCENARIOS

IMPROVE YOUR JUMPING FASTER! At Sender it is all about PROGRESSION. Our ramps and features are designed to help you gain confidence quickly at your level. It has never been easier to adjust your ramp to PERFECT your SKILLS. You can CUSTOMIZE your take off to be STRAIGHT, CURVED or EXTRA CURVED!

You can MICRO adjust (FINE TUNE) the HEIGHT of your take off from 200 to 350 mm High and adjust the feet for UNEVEN Terrain.

SENDER RAPID SET UP AND ADJUSTMENT SYSTEM!

Sender PROgression ramps can be used with SKATEBOARDS and SCOOTERS by bolting on our SKATE PLATE product! The Skate Plate is a Durable and Rigid 2mm adjustable Galvanised Steel Plate! NO WEAK PLYWOOD EDGE!

CARRY your ramp to the car / park / club or venue easily in our OPTIONAL Heavy Duty Colour Coded Bag.

You can mount other SENDER Ramps and Features such as our Pump Roller / Compression Roller and Tabletop to create realistic TRAIL Scenarios. You can use your PROGRESSION ramp as a TAKE OFF or LANDING RAMP.

WEIGHT LIMIT: 150 kgs SWL - Dynamic Testing to 450 kgs!

ENVIRONMENTALLY FRIENDLY: You can buy our REFRESH KIT to replace and renew worn out components!

SCOOTER AND SKATEBOARD COMPATIBLE: YES - With the Bolt On "Skate Plate"! The SKATE PLATE does not come with standard pack.

RIDERS, COACHES and CLUBS: The Perfect Ramp to ADVANCE your Jumping Skills - A BEGINNERS DREAM RAMP!

SENDER SURFACE: A GRIPPY hard wearing RESIN surface for all conditions

COACHING SURFACE: Please get in touch if you would like our PRO Coaching Surface added to your ramps - support@sender-ramps.com (0044) 07719 309214

WEIGHT: 12.5 kgs

BAG COLOUR / Material: Blue - Heavy Duty Vinyl with Adjustable Straps. 

STABILTY: Stable on grass, gravel or concrete due to shape and weight - Special Terrain Adjustment Legs

MODE: Adjustable from 200 to 350 mm with 3 Angle Settings - Straight - Curved - Curved +

ORBIT COMPATIBLE: NOT compatible

SECURE - Use our PEG points / holes on the front to prevent movement on grass.

SOLID - A ramp for LIFE - Construction from 18 mm (13 Layer) Birch plywood and Stainless Steel Fixings. No Elastic!

MODULAR: The Progression Range works with our CORE Range products at SET / SPECIFIC Heights - 200 / 350 / 500 / 650. Coming Soon Sender Progression Tabletop!

COMPACT / PORTABLE: Easy to move and carry once assembled in JUMP Mode. Folds quickly to fit in a car or van - Can be made VERY compact by unbolting and placing in our PROGRESSION Ramp Bag.

COMPACT FOLDED SIZE: Set Up Time - 2 Minutes

SUPER COMPACT BAG SIZE: Set Up Time  - 5 Minutes

DIMENSIONS UNFOLDED at 200 Height: 

LANDING RAMP: Not Essential - You can land this ramp to flat or a grass down slope

TRANSITION - 900 mm Long

SENDER BUILD QUALITY: 18mm (13 Layer) Birch Plywood Sides with 18mm (13 Layer) Birch Core GRIP Phenolic Surface. Stainless Steel Fixings. BOMBPROOF.

CUSTOM BRANDING : Add your Personal / Shop / Business IDENTITY! Contact: support@sender-ramps.com with a Vector File / Logo and we will send you a custom quote for artwork and CNC Cutting your TRAINER.

ASSEMBLED OR UNASSEMBLED: Save money by choosing to SELF Assemble your ramp OR Choose Assembled and we can do it for you! Self Assembly takes approx 1 hour with basic tools.

RAMP FOR LIFE and PRODUCT CARE - Always Store and dry your ramp inside. Treat cut edges and plywood faces with a LOW VOC Natural Coloured water based decking protector such as Ronseal. Spray and grease bolts and fixings. Spare parts are available!

USER WARNING / SAFETY: Jumping at any height is dangerous and can result in serious injury to yourself and others. ALWAYS wear a helmet, gloves and pads. Eyewear, a full face helmet and a neck brace are advisable. Always inspect your ramp for damage and secure ALL bolts before use. ALWAYS locate your ramp with good safe approach and exit. Landing on grass provides a more forgiving landing. If placed on concrete or tar ensure it does not slide. Start low, consolidate techniques and progress height with skill and confidence. 

IMAGES - Please note that images are illustrative and the product may vary slightly from that advertised.

BOLT ON EXTENDER FOR THE 500 CORE CURVED AND STRAIGHT AND EXPERT PROGRESSION RAMP

INSTANTLY INCREASE THE HEIGHT OF YOUR RAMP AND LENGTH OF TAKE OFF!

SUITABLE FOR MTB - SCOOTERS - BMX - SKATEBOARDS

INTERNATIONAL DESIGN COPYRIGHT APPLICATION FILED AND PENDING

SUITABLE / DESIGNED FOR: THE EXPERT PROGRESSION RAMP AND 500 CORE RANGE Curved and Straight RAMPS!  *It should not be used as a LANDING ramp extension or on other ramps not stated above* THE EXTENDER is NOT a STANDALONE RAMP. It is a BOLT ON Component! It does NOT work on the CLASSIC Ramp Range.

The SENDER EXTENDER can be varied in Angle (TILTED) and then secured in STRAIGHT, CURVED and CURVED + settings!

• HEIGHT WHEN USED ON THE EXPERT RAMP 500 to 900 mm

WHEN USED ON THE EXPERT RAMP - 24 IN 1!

24 RAMP SETTINGS

STRAIGHT

• 500 / 550 / 600 / 650 *EXT* 625 / 700 / 750 / 800

CURVED

• 500 / 550 / 600 / 650 *EXT* 700 / 750 / 800 / 850

CURVED PLUS - DIRT JUMP MODE

• 500 / 550 / 600 / 650 *EXT* 725 / 775 / 850 / 900

WHEN USED ON CORE FIXED HEIGHT 500 RAMP

• HEIGHT WHEN USED ON THE 500 CORE RAMP 500 to 650

TRANSITION LENGTH

• EXPERT and CORE RANGE 500 RAMPS 1500 to 1825mm!

The EXTENSION is an excellent and cost effective way to make your existing ramp BIGGER! QUICKER!

Progression Ramps allow you to CUSTOMIZE your take off to be STRAIGHT, CURVED or EXTRA CURVED! You can MICRO adjust (FINE TUNE) the HEIGHT of your take off and adjust the feet for UNEVEN Terrain.

SENDER RAPID SET UP AND ADJUSTMENT SYSTEM

You cannot mount other SENDER Ramps onto the SENDER EXTENDER. THE EXTENDER IS NOT A STANDALONE RAMP. IT IS A BOLT ON COMPONENT!

WEIGHT LIMIT: 150 kgs SWL - Dynamic Testing to 200 kgs!

ENVIRONMENTALLY FRIENDLY: You can buy our REFRESH KIT to replace and renew worn out components!

SCOOTER AND SKATEBOARD COMPATIBLE: YES - THE Extender will increase the length of the ramp surface

RIDERS, COACHES and CLUBS: The Perfect Extension to SUPERSIZE your existing ramp

SENDER SURFACE: A GRIPPY hard wearing RESIN surface for all conditions

COACHING SURFACE: Please get in touch if you would like our PRO Coaching Surface added to your ramps - support@sender-ramps.com (0044) 07719 309214

WEIGHT: 5 kgs

BAG COLOUR / Material: Does not have a bag but may fit inside an existing bag

STABILTY: Stable on grass, gravel or concrete due to shape and weight - Special Terrain Adjustment Legs

MODE: Adjustable with 3 Angle Settings - Straight - Curved - Curved +

ORBIT COMPATIBLE: N/A

SECURE - Please use our PEG points / holes on the front of the main ramp to prevent movement on grass when using the SENDER EXTENDER!

SOLID - A ramp for LIFE - Construction from 18 mm (13 Layer) Birch plywood and Stainless Steel Fixings. No Elastic!

MODULAR: The Extender works with our Expert and Core Range 500 Curved and Straight Ramps. It does NOT work on the CLASSIC Ramp Range.

COMPACT / PORTABLE: Easy to move and carry once assembled. Fits in a car or van - Can be made VERY compact by unbolting from the Main Ramp.

COMPACT FOLDED SIZE: Set Up Time - 2 Minutes

SUPER COMPACT BAG SIZE: N/A

DIMENSIONS UNFOLDED: N/A

LANDING RAMP: Not Essential - You can take off from this ramp and land to flat or on a grass down slope. 

TRANSITION - 325 mm extra length

SENDER BUILD QUALITY: 18mm (13 Layer) Birch Plywood Sides with 18mm (13 Layer) Birch Core GRIP Phenolic Surface. Stainless Steel Fixings. BOMBPROOF.

CUSTOM BRANDING : Add your Personal / Shop / Business IDENTITY! Contact: support@sender-ramps.com with a Vector File / Logo and we will send you a custom quote for artwork and CNC Cutting your TRAINER.

ASSEMBLED OR UNASSEMBLED: Save money by choosing to SELF Assemble your ramp OR Choose Assembled and we can do it for you! Self Assembly takes approx 1 hour with basic tools.

RAMP FOR LIFE and PRODUCT CARE - Always Store and dry your ramp inside. Treat cut edges and plywood faces with a LOW VOC Natural Coloured water based decking protector such as Ronseal. Spray and grease bolts and fixings. Spare parts are available!

USER WARNING / SAFETY: Jumping at any height is dangerous and can result in serious injury to yourself and others. ALWAYS wear a helmet, gloves and pads. Eyewear, a full face helmet and a neck brace are advisable. Always inspect your ramp for damage and secure ALL bolts before use. ALWAYS locate your ramp with good safe approach and exit. Landing on grass provides a more forgiving landing. If placed on concrete or tar ensure it does not slide. Start low, consolidate techniques and progress height with skill and confidence. 

IMAGES - Please note that images are illustrative and the product may vary slightly from that advertised.